Theatrical Hardware

Type a description for this product here...

Mending plates can be used for quick repairs or as fastening hardware during construction, among other uses. Eight counter-sunk holes for #8 or #10 flat head screws. Made from 1/8″...

The Leg-a-Matic II builds on the efficiency and effectiveness of the Leg-a-Matic because now you can leg up with 1.5″ steel pipe* and 2″ square steel tube! The bracket bolts to the...

The Leg-a-Matic II builds on the efficiency and effectiveness of the Leg-a-Matic because now you can leg up with 1.5″ steel pipe* and 2″ square steel tube! The bracket bolts to the...

This simple yet indispensable piece of hardware creates a corner pocket for 2×4 platform legs. Bracket bolts to platform frame with standard 3/8″ bolts. The 2×4 leg is attached...

13 gauge x 6″ long. An easy, quick solution for connecting two sides of loose-pin backflap hinges.

The Sure Hinge is a special type of loose pin hinge with interchangeable halves. It is scored so you can bend it around nominal 1″ lumber.

Backflap hinges are generally used as an aid in attaching scenery flats. Loose pin hinges are just what they sound like: hinges in which the pin is removable. They are most often used when scenery...

Backflap hinges are generally used as an aid in attaching scenery flats. Tight pin hinges have a permanent pin in the hinge spine. 12 hinges per pack

This load-rated piece of hardware allows you to easily use shackles (also rated) to rig your scenery to lift lines. Made from heavy-gauge steel and pre-drilled for assembly with two 1/4″...

is load-rated piece of hardware allows you to easily use shackles to rig your scenery to lift lines. Made from heavy-gauge steel and pre-drilled for assembly with two 1/4″ thru-bolts and two #8...

This load-rated shackle plate allows you to easily use shackles to rig your scenery to lift lines. Made from heavy-gauge steel and pre-drilled for assembly with two 1/4″ thru-bolts. Opening for...

With this load-rated shackle plate, you can use shackles instead of d-rings to rig your scenery to lift lines. Made from heavy-gauge steel and pre-drilled for assembly with two 1/4″...

Great for hanging picutres and other objects on set walls. 

These plates are used to capture steel cable against a flat, or in conjunction with D-rings. Available in standard length or short “stubby” length. Made of heavy gauge steel and...