Martin MAC Viper Profile (in cardboard box)

Features

 

Fixture Type:

Profile

Emitter:

HID - 6000K

Dynamics Effects

 

Color mixing:

CMY, independently variable 0 - 100%

Color temperature control:

CTO, variable 6000 - 3200 K

Color wheel:

8 interchangeable dichroic filters + open, indexing, continuous rotation, random color

Aerial wheel:

5 interchangeable aerial effects + open, indexing, continuous rotation and shake

Breakup wheel:

5 interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake

FX wheel:

Interchangeable static gobo and gobo animation effects

Prism:

Interchangeable 4-facet rotating prism

Iris:

0-100%, pulse effects

Frost:

Frost filter

Mechanical dimmer/shutter:

0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout

Dimming options:

Choice of four dimming curves

Focus:

Range varies with zoom angle, from 2 m / 6 m to infinity (approx.)

Zoom focus linking system:

3-zone

Zoom:

Motorized

Pan:

540°

Position correction system:

Absolute position monitoring

Control and Programming

 

DMX channels:

26/34

Setting and addressing:

Control panel with backlit graphics display and jog wheel or via DMX

16-bit control:

Aerial, breakup and texture effect rotation and indexing, focus, zoom, pan and tilt

DMX compliance:

USITT DMX512-A

RDM compliance:

ANSI/ESTA E1.20

Receiver:

Opto-isolated RS-485

Firmware update:

USB memory device or USB/DMX hardware interface over DMX link

Lamp

 

Type:

1000 W short-arc discharge

Color Temperature:

6000 K

CRI (Color rendering index):

>85

Average Lifetime:

750 hours

Socket:

PGJX36

Ballast:

Electronic

Approved Lamps:

Osram Lok-it! 1000/PS Brilliant, Osram Lok-it! 1000W/PS VS1, Philips MSR Gold MiniFastFit 1000W

Optics

 

Zoom Range:

10-44° (1:4)

Output:

26 000 lm

Gobos

 

Size:

E27 (Size E, max. image diameter 27 mm)

Approved Material:

Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved)

Outside diameter:

37.5 mm +0/- 0.2 mm (1.5 in. +0/- 0.01 in.)

Maximum image diameter:

27 mm (1.1 in.)

Maximum thickness:

1.1 mm +/- 0.1 mm (0.1 in. +/- 0.01 in.)

Installation

 

Mounting points:

Eight quarter-turn locking points

Orientation:

Any

Minimum distance to illuminated surfaces:

3.4 m (11.2 ft.)

Minimum distance to combustible materials:

0.3 m (1.0 ft.)

Connections

 

AC power input:

Neutrik PowerCon

DMX and RDM data in/out:

5-pin locking XLR

USB memory devices:

USB host socket

Electrical

 

AC power:

120-240 V nominal, 50/60 Hz

Power supply unit:

Auto-ranging electronic switch-mode

Typical half-cycle RMS inrush current:

16.2 A

Thermal

 

Cooling:

Filtered forced air (temperature-regulated, low noise)

Min / Max ambient temp:

5° C (41° F), 40° C (104° F)

Total heat dissipation:

4180 BTU/hr

Included Items

 

Lamp (installed):

P/N 97010346

Two Omega clamp attachment brackets with 1/4-turn fasteners:

P/N 91602001

Safety and installation manual:

P/N 35000258

Downloads and Firmware:

https://www.martin.com/en-US/products/mac-viper-profile

Shipping

Shipping Options

We offer free ground shipping on most items for orders $300 and over, $20 for flate rate ground shipping on orders from $150 to $299.99, and $14 flat rate ground shipping on most items for orders under $149.99. *paints, liquids, and large volume items like boom bases (very heavy) or fake snow (not heavy, but very large) may incur a shipping surcharge. Exclusion of items from Free and Flat Rate shipping is at ProAdv's discretion. Offer is currently limited to Lower 48 US States.

We ship to North American addresses. Note that there are restrictions on some products, and some products cannot be shipped to international destinations, or even certain states depending on the item and state or local laws.

Pandemic Availability Notice

Please Note: Due to unprecedented raw material and component shortages for finished goods throughout our industry, lead times for items that aren't currently in stock are longer than normal and cannot be guaranteed at present. Equipment needed by a firm date must be noted at time of order. While VLS cannot guarantee delivery by those dates, we will work with our suppliers to do everything possible to meet deadlines. We apologize for the inconvenience and appreciate your patience.

Same Day Shipping Cutoff time

(Due to Pandemic-related availability issues, this policy is currently suspended)

Online orders received by noon Eastern time typically ship the same day. If your delivery due date is critical please note your due date in the order messages at checkout, and then contact us.

Why Noon? Well, while we stock quite a few items in our warehouse, many items we have dropshipped by our vendors. They need time to process the order, so to ensure that we can get the order to the vendor and give them enough time to ship it out the same day, we need to get the order to them as early as possible in the day.

Shipping Rating

Please also note that the shipping rates for many items we sell are weight and dimension based, as this is the method that FedEx and UPS use to rate the package's cost to ship.

Returns Policy

We understand things happen and items occasionally need to be returned. To make things as hassle-free as possible, we have dedicated pages about our Returns Policy (what’s eligible to be returned) and our Return Process (how to go about returning eligible items)