Martin MAC Aura XB

Features

 

Fixture Type:

Wash

Emitter:

LED - 3000K

Dynamic Effects

 

Beam color mixing:

RGBW

Aura color mixing:

RGB

Beam color temperature control:

CTO, variable 10 000 - 2500 K

Beam and aura electronic 'color wheel' effect:

33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color

Beam and aura independent shutter effects:

Electronic, with regular and random pulse, burst and strobe effects

Pre-programmed effects:

Range of independent and synchronized Beam and Aura FX, two combinable

Electronic Dimming:

Independent beam and aura, four dimming curve options

Zoom:

10° - 60° (one-tenth peak angle)

Pan:

540°

Tilt:

232°

Pan and tilt speed:

Adjustable via onboard control panel and DMX

Control and Programming

 

Control options:

Independent or synchronized Beam and Aura control

Control system:

DMX, RDM

Control resolution:

8-bit, with 16-bit control of pan & tilt

DMX channels:

14/25

Setting and addressing:

Control panel with backlit graphic display

DMX compliance:

USITT DMX512-A

RDM compliance:

ANSI/ESTA E1.20

Transceiver:

RS-485

Firmware update:

Via DMX with Martin™ USB Duo DMX Interface Box

Optics and Photometric Data

 

Light source:

19x 15W RGBW LED Array System

LED refresh rate:

Beam 1200 Hz, Aura 4395 Hz

Minimum LED lifetime:

50 000 hours

Total luminous output (wide, one-tenth peak):

6000 lumens

Total luminous output (narrow, one-tenth peak):

4300 lumens

Video compatibility:

Designed for use with HD/high-speed video cameras

Installation

 

Mounting points:

M12 hole for rigging clamp, attachment points for surface-mounting bracket

Orientation:

Any

Minimum distance to combustible materials:

200 mm (8 in.) from fixture

Minimum distance to illuminated surfaces:

1 m (3 ft. 4 in.) from fixture

Location:

Indoor use only, must be fastened to surface or structure

Connections

 

AC power:

Neutrik PowerCON TRUE1 NAC3PX dual socket

AC power input socket:

Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector

AC power thru socket:

Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector

DMX data in/out:

5-pin locking XLR

Electrical

 

Maximum power consumption:

400 W

Power supply unit:

Auto-ranging electronic switch mode

AC power:

100-240 V nominal, 50/60 Hz

Typical half-cycle RMS inrush current:

10.7 A

Power consumption, all effects static, zero light output:

<25 W

Thermal

 

Cooling:

Forced air (temperature-regulated, low noise, user-definable levels)

Min / Max ambient temp:

5° C (41° F), 40° C (104° F)

Total heat dissipation:

1230 BTU/hr.

Included Items

 

M12 Bolt:

Suitable for use with Martin rigging clamps

NOTE:

Power cables and connectors are not included and must be ordered separately

Downloads and Firmware:

https://www.martin.com/en-US/products/mac-aura-xb

Shipping

Shipping Options

We offer free ground shipping on most items for orders $300 and over, $20 for flate rate ground shipping on orders from $150 to $299.99, and $14 flat rate ground shipping on most items for orders under $149.99. *paints, liquids, and large volume items like boom bases (very heavy) or fake snow (not heavy, but very large) may incur a shipping surcharge. Exclusion of items from Free and Flat Rate shipping is at ProAdv's discretion. Offer is currently limited to Lower 48 US States.

We ship to North American addresses. Note that there are restrictions on some products, and some products cannot be shipped to international destinations, or even certain states depending on the item and state or local laws.

Pandemic Availability Notice

Please Note: Due to unprecedented raw material and component shortages for finished goods throughout our industry, lead times for items that aren't currently in stock are longer than normal and cannot be guaranteed at present. Equipment needed by a firm date must be noted at time of order. While VLS cannot guarantee delivery by those dates, we will work with our suppliers to do everything possible to meet deadlines. We apologize for the inconvenience and appreciate your patience.

Same Day Shipping Cutoff time

(Due to Pandemic-related availability issues, this policy is currently suspended)

Online orders received by noon Eastern time typically ship the same day. If your delivery due date is critical please note your due date in the order messages at checkout, and then contact us.

Why Noon? Well, while we stock quite a few items in our warehouse, many items we have dropshipped by our vendors. They need time to process the order, so to ensure that we can get the order to the vendor and give them enough time to ship it out the same day, we need to get the order to them as early as possible in the day.

Shipping Rating

Please also note that the shipping rates for many items we sell are weight and dimension based, as this is the method that FedEx and UPS use to rate the package's cost to ship.

Returns Policy

We understand things happen and items occasionally need to be returned. To make things as hassle-free as possible, we have dedicated pages about our Returns Policy (what’s eligible to be returned) and our Return Process (how to go about returning eligible items)